Tuesday, November 1, 2011

Ultem 1000 Sheet, Beige, 1/8" Thick, 12" Width, 12" Length

Ultem 1000 Sheet, Beige, 1/8" Thick, 12" Width, 12" Length Reviews



Other Picture


Ultem 1000 Sheet, Beige, 1/8" Thick, 12" Width, 12" Length Feature

  • USP Class VI
  • Is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors
  • PEI has found use in the Medical Device Market because of its heat and radiation resistance
  • It is prone to stress cracking in chlorinated solvents.
  • It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents.
Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 340 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates.


Visit Store Now !!

Detail Products

Detail Reviews




Monday, October 31, 2011

Acetal Sheet, White, 1" Thick, 6" Width, 12" Length

Acetal Sheet, White, 1" Thick, 6" Width, 12" Length Reviews



Other Picture


Acetal Sheet, White, 1" Thick, 6" Width, 12" Length Feature

  • Excellent machinability
  • Excellent Dimensional Stability
  • Tough and Impact Resistant
  • Low Coefficient of Friction
  • Moderate Chemical Resistance
Commonly referred to as Delrin, this natural colored Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.


Visit Store Now !!

Detail Products

Detail Reviews




Saturday, October 29, 2011

Fluorosint 500 PTFE Sheet, White, 1" Thick, 6" Width, 12" Length

Fluorosint 500 PTFE Sheet, White, 1" Thick, 6" Width, 12" Length Reviews



Other Picture


Fluorosint 500 PTFE Sheet, White, 1" Thick, 6" Width, 12" Length Feature

  • Low Deformation Under Load
  • Low Coefficient of Friction
  • Excellent Dimensional Stability
  • FDA and USDA Compliant
  • Chemically Inert
Fluorosint 500s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE. This bonding results in properties not normally attainable in reinforced PTFE. It has a continuous use temperature to 500 F. When compared to PTFE it has a higher load carrying capability, and lower coefficient of thermal expansion. Fluorosint 500 is a structural/seal grade filled with enough mica to produce a thermal expansion 15percent less than unfilled PTFE.


Visit Store Now !!

Detail Products

Detail Reviews




Friday, October 28, 2011

Rulon LR Sheet, Maroon, 3/8" Thick, 6" Width, 12" Length

Rulon LR Sheet, Maroon, 3/8" Thick, 6" Width, 12" Length Reviews



Other Picture


Rulon LR Sheet, Maroon, 3/8" Thick, 6" Width, 12" Length Feature

  • Superior Temperature Resistance
  • High Coefficient of Friction
  • High Wear Resistance, Standard for Bearing and Bushing Design
  • Chemical Resistant
  • Good Impact Resistance
Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.


Visit Store Now !!

Detail Products

Detail Reviews




Thursday, October 27, 2011

Phenolic XX Paper Grade Sheet, Natural, 0.187" Thick, 12" Width x 12" Length

Phenolic XX Paper Grade Sheet, Natural, 0.187" Thick, 12" Width x 12" Length Reviews



Other Picture


Phenolic XX Paper Grade Sheet, Natural, 0.187" Thick, 12" Width x 12" Length Feature

  • Phenolic XX Paper Grade
  • Mil P 3115
  • NEMA XX
  • Type PBE
  • LP 509
Phenolics are also known by various trade names such as Micarta, Spauldite, and Texolite. They are high pressure laminates that are hard and dense. They are made by applying heat and pressure to a series of layered materials such as cellulose, cotton fabric, synthetic fibers, glass fibers or woven fabrics and then impregnated with synthetic resin. Once the layers are heated and pressure is applied, the layers are transformed into a high pressure thermosetting industrial laminate.


Visit Store Now !!

Detail Products

Detail Reviews




Wednesday, October 26, 2011

Polypropylene Perforated Sheet, White, Staggered 3/16" Round Perfs, 5/16" Center Spacing, 3/16" Thick, 12" Width, 24" Length

Polypropylene Perforated Sheet, White, Staggered 3/16" Round Perfs, 5/16" Center Spacing, 3/16" Thick, 12" Width, 24" Length Reviews



Other Picture


Polypropylene Perforated Sheet, White, Staggered 3/16" Round Perfs, 5/16" Center Spacing, 3/16" Thick, 12" Width, 24" Length Feature

  • Limited Cycles of Steam Sterilization
  • Highly Resistant to Corrosive Materials
  • Outstanding Chemical Resistance
  • Continuous Temperature 180 - 200 F
  • Low Cost
Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.


Visit Store Now !!

Detail Products

Detail Reviews




Tuesday, October 25, 2011

Polycarbonate Sheet, ASTM D 3935, Clear, 0.375" Thick, 12" Width, 24" Length

Polycarbonate Sheet, ASTM D 3935, Clear, 0.375" Thick, 12" Width, 24" Length Reviews



Other Picture


Polycarbonate Sheet, ASTM D 3935, Clear, 0.375" Thick, 12" Width, 24" Length Feature

  • High Impact Resistance
  • Temperature Range of -60 to 270 F
  • High Rigidity
  • Ductility of Softer Lower Modulus Plastics
  • Transparent Clear
Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).


Visit Store Now !!

Detail Products

Detail Reviews