Plastic Sheets: September 2011

Friday, September 30, 2011

Polycarbonate Sheet, ASTM D 3935, Clear, 0.250" Thick, 12" Width, 12" Length

Polycarbonate Sheet, ASTM D 3935, Clear, 0.250" Thick, 12" Width, 12" Length Reviews

Other Picture

Polycarbonate Sheet, ASTM D 3935, Clear, 0.250" Thick, 12" Width, 12" Length Feature

High Impact Resistance
Temperature Range of -60 to 270 F
High Rigidity
Ductility of Softer Lower Modulus Plastics
Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, September 29, 2011

PLA-LF, Sheet, Brown, 24" Width, 0.200" Thick, 48" Length

PLA-LF, Sheet, Brown, 24" Width, 0.200" Thick, 48" Length Reviews

Other Picture

PLA-LF, Sheet, Brown, 24" Width, 0.200" Thick, 48" Length Feature

80% Bio-based
High rigidity
Bio-degradable
Comparable to fibre-reinforced Polyolefins
Woodlike; Impact Strength (ft-lb/square inch): 3.5

A composite material of polylactide, a small amount of a petroleum-based polyester and wood fibres (30%). It possesses high mechanical strength thanks to the excellent binding of the wood fibres and the polymer blend. This is comparable with standard fibre-reinforced polymers. It also displays good thermal insulation and conforms to the standards governing toys. Specific gravity (p): 1.0 g/cube cm. Ratio of renewable raw materials: > 80 Percent. Industrially compostable: Yes. Tensile strength at yield: 5206. Elongation at yield: 3.4 Percent. Elongation at break: 3.6. Modulus of elasticity (Et): 573 kpsi. Heat deflection temperature HDT/A: 161.

Visit Store Now !!

Detail Products

Detail Reviews

PTFE Sheet, Bondable (Etched), White, 0.06" Thick, 12" Width, 12" Length

PTFE Sheet, Bondable (Etched), White, 0.06" Thick, 12" Width, 12" Length Reviews

Other Picture

PTFE Sheet, Bondable (Etched), White, 0.06" Thick, 12" Width, 12" Length Feature

Bondable Sheet Form
Max Temp 500 F
Very Low Coefficient of Friction
Extremely Low Dielectric Constant
UV and Ozone Resistant

Bondable PTFE sheet is etched on one side. (Polytetrafluoroethylene) Sometimes known as Teflon, it has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F . This material should not be heated to temperatures above 752 degrees F (400 degrees C). Thicknesses (0.015 inches, 0.030 inches and 0.060 inches) are available. Sheets are etched on one side to make them bondable to other materials with most general purpose epoxies. Our stock sizes are cut from rolls and the material may be slightly curved, but it can easily be flattened by applying pressure to the whole surface.

Visit Store Now !!

Detail Products

Detail Reviews

Tuesday, September 27, 2011

Polypropylene Perforated Sheet, White, Staggered 1/8" Round Perfs, 7/32" Center Spacing, 1/8" Thick, 12" Width, 12" Length

Polypropylene Perforated Sheet, White, Staggered 1/8" Round Perfs, 7/32" Center Spacing, 1/8" Thick, 12" Width, 12" Length Reviews

Other Picture

Polypropylene Perforated Sheet, White, Staggered 1/8" Round Perfs, 7/32" Center Spacing, 1/8" Thick, 12" Width, 12" Length Feature

Limited Cycles of Steam Sterilization
Highly Resistant to Corrosive Materials
Outstanding Chemical Resistance
Continuous Temperature 180 - 200 F
Low Cost

Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.

Visit Store Now !!

Detail Products

Detail Reviews

Monday, September 26, 2011

Plaskolite 1PC3244A XL10 Polycarbonate Lexan Sheet (Pack of 6)

Plaskolite 1PC3244A XL10 Polycarbonate Lexan Sheet (Pack of 6) Reviews

Other Picture

Lexan is a polycarbonate sheet that is 250 times stronger than glass with excellent weatherability and insulating properties. Commonly used in many glass replacement applications. Used to protect stained glass windows, vending machines, and display cases. Also used in high security areas due to strength and impact resistance. 10 year warranty against yellowing and breakage. Lexan can be easily cut with a scoring knife. .093'' thickness. No. 1PC0810A: 8'' x 10'' No. 1PC1114A: 11'' x 14'' No. 1PC1824A: 18'' x 24'' No. 1PC3244A: 32'' x 44''

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, September 25, 2011

Polysulfone Sheet, Translucent Amber, 1" Thick, 6" Width, 12" Length

Polysulfone Sheet, Translucent Amber, 1" Thick, 6" Width, 12" Length Reviews

Other Picture

Polysulfone Sheet, Translucent Amber, 1" Thick, 6" Width, 12" Length Feature

Continuous use temperature is 350 F
Steam Sterilizable
High Tensile Strength
Clear Amber Transparent
Self Extinguishing

Polysulfone PSO (UDEL Brand) is considered to be in the class of Superpolymers since it maintains its physical properties at temperatures above 400 F. Polysulfone is a clear amber amorphous thermoplastic that is stable, heat resistant and self extinguishing. It has a UL-rated continuous temperature of 320 F. It is very rigid with a flex modulus of 400,000 psi with a tensile strength of over 10,000 psi at yield. It has a high dielectric strength and low dissipation factor. PSO is highly resistant to mineral acid, alkali, and salt solutions. PSO is attacked by polar organic solvents and chlorinated and aromatic hydrocarbons. It is used in the Medical Device Industry and can be steam sterilized multiple times. Food grade microwave cookware and coffee carafes are a few of the many high temperature uses. FDA CFR-177.1655

Visit Store Now !!

Detail Products

Acetal Sheet, Black, 3/8" Thick, 6" Width, 12" Length

Detail Reviews

Saturday, September 24, 2011

Polypropylene Perforated Sheet, Staggered 1/8" Round Perfs, 1/4" Center Spacing, 23% Open Area, 0.1875" Thick, 32" Width, 48" Length

Polypropylene Perforated Sheet, Staggered 1/8" Round Perfs, 1/4" Center Spacing, 23% Open Area, 0.1875" Thick, 32" Width, 48" Length Reviews

Other Picture

Polypropylene Perforated Sheet, Staggered 1/8" Round Perfs, 1/4" Center Spacing, 23% Open Area, 0.1875" Thick, 32" Width, 48" Length Feature

Great for acoustical applications
Less weight than standard flat sheet
Great for filtering and screen purposes
Aesthetically pleasing for architectural uses
Commonly used in the food service industry

As a screening medium, perforated plastic has many advantages. The holes in our perforated plastic products are accurate and uniform in size, shape and spacing. The sheet surface is smooth, firm, easily cleaned and sterilized. Perforated Polypropylene is durable and is commonly used in the food service industry.

Visit Store Now !!

Detail Products

Detail Reviews

Friday, September 23, 2011

Nylatron GS Sheet, Black, 1/4" Thick, 12" Width, 12" Length

Nylatron GS Sheet, Black, 1/4" Thick, 12" Width, 12" Length Reviews

Other Picture

Nylatron GS Sheet, Black, 1/4" Thick, 12" Width, 12" Length Feature

Excellent Bushing and Bearing Material
1/8 the Weight of Bronze
Corrosion Resistant
Easily Maintained
Easily Fabricated

Nylatron GS Nylon 6/6 is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. It exhibits excellent wear and abrasion resistance and is 1/8 the weight of bronze making it an excellent replacement for metal bushings. It is easier to fabricate and maintain than metal.

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, September 22, 2011

Warp Brothers 4x 8-C 4mm 8'x 100' Clear Poly-Cover Plastic Sheets

Warp Brothers 4x 8-C 4mm 8'x 100' Clear Poly-Cover Plastic Sheets Reviews

Other Picture

Warp Brothers 4x 8-C 4mm 8'x 100' Clear Poly-Cover Plastic Sheets Feature

Guaranteed to be full weight and thickness

Poly-cover plastic sheets

Visit Store Now !!

Detail Products

Dremel 4486 MultiPro Keyless Chuck

Detail Reviews

Wednesday, September 21, 2011

Torlon 4301 Sheet, Grey, 3/4" Thick, 3" Width, 3" Length

Torlon 4301 Sheet, Grey, 3/4" Thick, 3" Width, 3" Length Reviews

Other Picture

Torlon 4301 Sheet, Grey, 3/4" Thick, 3" Width, 3" Length Feature

Temperature resistance from cryogenic to 500 F
Melt Processable
Excellent Chemical Resistance
High Strength
UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

Tuesday, September 20, 2011

Rulon LR Sheet, Maroon, 3/4" Thick, 6" Width, 12" Length

Rulon LR Sheet, Maroon, 3/4" Thick, 6" Width, 12" Length Reviews

Other Picture

Rulon LR Sheet, Maroon, 3/4" Thick, 6" Width, 12" Length Feature

Superior Temperature Resistance
High Coefficient of Friction
High Wear Resistance, Standard for Bearing and Bushing Design
Chemical Resistant
Good Impact Resistance

Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.

Visit Store Now !!

Detail Products

Detail Reviews

Monday, September 19, 2011

Torlon 4301 Sheet, Grey, 1" Thick, 12" Width, 12" Length

Torlon 4301 Sheet, Grey, 1" Thick, 12" Width, 12" Length Reviews

Other Picture

Torlon 4301 Sheet, Grey, 1" Thick, 12" Width, 12" Length Feature

Temperature resistance from cryogenic to 500 F
Melt Processable
Excellent Chemical Resistance
High Strength
UL 94 Rated

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, September 18, 2011

ABS Sheet, Natural Beige, 1/8" Thick, 12" Width, 12" Length

ABS Sheet, Natural Beige, 1/8" Thick, 12" Width, 12" Length Reviews

Other Picture

ABS Sheet, Natural Beige, 1/8" Thick, 12" Width, 12" Length Feature

Good Chemical Resistance
Hard Surface
Easily Machined
Good for Vacuum Forming
Good Impact Resistance

General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene...to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295 degrees F (146 degrees C) - Rockwell Hardness R-105. Color: Natural (Beige)